|
 |
|
|
The sludge surface monitoring mechanism used in the FHP pump
ensures that only supernatant water is discharged without
any entrapment of sediments.
Discharge |
Model |
Motor |
Phase |
Total |
Capa- |
Starting |
Dry |
Cable |
40 |
FHP-3 | 0,25 |
single |
3 |
170 |
split phase |
26,5 |
10 |
40 |
FHP-3T | 0,25 |
3-phase |
3 |
170 |
d.o.l. |
26,0 |
10 |
50 |
FHP-4 | 0,4 |
single |
3 |
260 |
condensor |
29,5 |
10 |
50 |
FHP-4T | 0,4 |
3-phase |
3 |
260 |
d.o.l. |
27,5 |
10 |
50 |
FHP-8T | 0,75 |
3-phase |
3 |
380 |
d.o.l. |
27,5 |
10 |
| dry weight of the pump excluding cable | ||||||||
Major Standard Specifications |
|||
| Item | Discharge bore (mm) | 40 50 | |
| Pumping fluid | Type of fluid | Treated water |
|
| Liquid temperature | 0 ~ 40°C |
||
| Pump | Components | Impeller | non-clogging |
| Shaft Seal | Double mechanical seal |
||
| Bearing | Shielded ball bearing |
||
| Materials | Impeller | Grey iron casting |
|
| Casing | Grey iron casting |
||
| Float | Fibre reinforced plastic |
||
| Shaft seal (mechanical seal) |
Silicon Carbide |
||
| Motor | Type, Poles | Dry-type submersible |
|
| Insulation | Class E |
||
| Phase / Voltage | Single-230V/3-phase 400V |
||
| Motor Protector (built-in) | Circle Thermal cut-out |
||
| Lubricant | Turbine Oil (ISO VG32) |
||
| Materials | Frame | Grey iron casting |
|
| Shaft | Stainless steel 403 |
||
| Cable | H07RN-F |
||
| Discharge Connection | Hose coupling |
||
Click here for dimensional drawing
